C8 C10 is a traditional and popular profile in the Russian market. The C8 C10 metal sheet could be used on roofing and wall cladding. The detailed profile drawing is shown below:

The C8 Iron sheet forming machine's main components include 1 set of decoiler, 1 set of roll forming machine, 1 set of runout table, 1 set of PLC control cabinet, 1 set of runout table.

The main technical specification:

1. rolling stands: 13 rolling stands
2. The shaft diameter is 75mm, and the shaft material is high-quality C45 steel.
3. The roller material is high-quality C45 steel, with hard chromed treatment, which increases the hardness.
4. The machine runs at a speed of 15-20m/min. If the client needs faster, we customize according to the client's request.
5. The machine structure is a medium steel plate welded, with a thickness of up to 20mm.
6. The main motor power is 7.5KW, the hydraulic station motor power is 4KW.
7. The C8 roll former transmission is by double chains
8. Hydraulic cutting, with 4 columns, makes the structure more stable and durable
9. There are oil lubrication systems, which are used to lubricate the columns.
10. The PLC brand is Delta, the inverter brand is Delta, and the touch screen brand is Delta.
11. The encoder brand is Omron.

The advantage of the ZTRFM metal sheet roll forming machine is shown below:

1. A new type of feeding device, which is a horizontal pillar structure, with turnable rollers. All the rollers are turnable and very smooth, which ensures the metal sheet surface will not be scratched. With an upgraded manual pre-cutter, which is used to cut the sheet before forming.

2. The basic frame with diagonal bracing and cross bracing, which guarantees the machine's basic frame is very stable. It will not get deformed during loading into the container, and after many years of use.

3. The shaft and rollers are connected by a key groove and keys. This ensures the shaft and rollers will not loosen after years of use. Adopt a double lock system, which ensures the shaft will not loosen; it is very stable when installed on the machine body.

4. There are oil lubrication systems, which are used to lubricate the columns. This can increase the cutter structure's lifetime.