This is a new design solar strut channel roll forming machine. There are 26 rolling stations. The production speed is 10-20m/min. Fly punching and fly cutting. Let’s learn the details of the solar panel mounting roll forming machine.

1. working flow of this solar strut machine : 3 tons hydraulic decoiler ------feeding device-----process the teech-----roll forming ------fly punching------fly cutting

2. The profile drawing of solar strut C channel

3. There are 26 rolling stations; the shaft diameter is 70mm, roller material is Cr12 or Cr12MoV. The main motor power is 44KW, with fly punching and fly cutting. The hydraulic station motor power is 22KW. Speed up to 20m/min. Transmission by gearbox, more powerful, the machine is very stable and durable.

4. There is 1 rolling station use to process the teeth, it is stable for installation, and is not easy to lose.

5. With a water cooling system, ensure the solar strut C profile machine works stably. Even after a long time working, the rollers are not getting hot, and will not deform.

If you are looking for a solar strut roll forming machine, contact us freely!