Ceiling T bar T grid Main T Cross T Roll Forming Machine

by melinda

We made many T grid roll forming machines, sold to Saudi Arabia, Egype, Israel, Gordan, Iran, Pakistan, Cambodia, Vietnam.etc. We developed the new type T bar roll forming machine, one machine can produce both flat T bar and black groove T bar. The main T roll forming machine speed up to 35m/min, the Cross T roll forming machine speed up to 25m/min.

T grid roll forming machine 11 — Ceiling T bar T grid Main T Cross T Roll Forming Machine 15

The profile drawing of main T Cross T profile

T grid ceiling forming machine — Ceiling T bar T grid Main T Cross T Roll Forming Machine 16

2. The working flow of Main T grid forming machine:

two set manual decoiler-------feeding device-----main roll forming machine------Straightening unit------dryer ------punching & cutting automatically-----runout table

The working flow of Cross T grid roll forming machine:

two set manual decoiler-------feeding device-----main roll forming machine------Straightening unit------dryer ------punching & cutting automatically-----runout table

From above working flow, we can learn the main T and Cross T roll forming machine is the same principle.

The difference is the punching unit. The main T ceiling forming machine has 12 punching units, but the cross T ceiling forming machine only has 3 punching unit. Do you know why?

Normally main T bar cutting length is 3600mm or 3660mm, cross T bar cutting length is 600mm or 610mm. That's the main T machine need 12 punching units, but the cross T machine only need 3 punching units.

3. The main T bar making machine photos and main technical specification

T grid roll forming machine 10 1 — Ceiling T bar T grid Main T Cross T Roll Forming Machine 19

T grid roll forming machine 6 1 — Ceiling T bar T grid Main T Cross T Roll Forming Machine 20

T grid roll forming machine 4 — Ceiling T bar T grid Main T Cross T Roll Forming Machine 21

T grid roll forming machine 5 1 — Ceiling T bar T grid Main T Cross T Roll Forming Machine 22

rolling station	21 rolling station
shaft	shat material is C45 steel, diameter 50mm
roller	roller material is Cr12 quenched,HRC 58-62, Hard chroming treatment
main motor 2 sets	4KW+4KW
servo motor	power 11KW
hydraulic station motor	15KW
punching stations	12 stations
speed	25-35m/min
voltage	380V 50HZ 3Phase or as per client's request
machine colour	green, white, blue, red

4. The Cross T grid making machine photos and technical specifications

T grid roll forming machine 11 1 — Ceiling T bar T grid Main T Cross T Roll Forming Machine 23

T grid roll forming machine 14 — Ceiling T bar T grid Main T Cross T Roll Forming Machine 24

T grid roll forming machine 12 — Ceiling T bar T grid Main T Cross T Roll Forming Machine 25

rolling station	21 rolling station
shaft	shaft material is C45 steel, diameter 50mm
roller	roller material is Cr12 quenched, HRC 58-62, hard chroming treatment
main motor 2 sets	4KW+4KW
hydraulic station motor power	7.5KW
Servo motor power	2.9KW
speed	25m/min
punching unit	3 units
voltage	380V 50HZ 3Phase
machine colour	green,blue, red, white