Metal Stud Track CU Steel Keel Roll Forming Machine

This is a double line roll forming machine, one machine produces C Stud and U Track profiles, also named metal stud track roll former. The advantages of double line metal stud and track forming machine are as below:

1. one machine produces two profiles, one line for C stud, and one line for U track.
2. C stud forming line and U track forming machine can work at the same time and also can work separately. Because of two forming lines with its own driven system and control system.
3. Save space, save some cost.
4. Machine running speed 30-40m/min.

Metal keel steel stud and track roll forming machine display:

1. Double-head manual decoiler

• Work type: passive type, driven by roll forming machine
• Usage: to support the coil and make the uncoiling
• Loading capacity: 1.5 tons
• Inner diameter:470-520mm
• Coil width:300mm
• Brake system: manual brake system

2. Double line CU Profile roll forming machine

• Feeding device: One set guiding roller, Steel plate welded platform to carry the sheet and feed into roll forming system; Feeding width is adjustable with the handle wheels
• Rolling shaft: Material 45#, Shaft diameter 50mm; tempering treatment
• Roller: Cr12, quenched, fine processing
• Roller station: 12 rolling station + 12 rolling station
• Line speed: 0-40m/min without punching holes; 0-30m/min with punching holes
• Machine structure: cast iron arch structure, more stable and accurate
• Machine basic frame: box structure frame, steel plate welded, the cover plate through milling machine processing
• Main motor power: 5.5kw+ 5.5kw
• Straightening unit: 1 unit + 1 unit, ensure metal products are straight
• All the tubes and lines are installed on the machine body, the client only makes power on, machine works.
• Rolling spacer: Anti-rusty treatment
• Transmission: by chains
• Fly cutting and fly punching, cutting die, and punching die material are Cr12MoV, quenched, HRC 58-62.

3. Hydraulic station

• install in machine’s basic frame, save space, also connect tube is easy
• With cooling fan or not: Yes
• Hydraulic motor power:3kw + 3kw
• Hydraulic oil: 46# hydraulic oil
• Oil tube and wires connection: all the tubes and wires will be installed on the machine

4. PLC control station

• install on the machine body, save space
• Inverter brand: Delta brand (original)
• PLC brand: Xinjie brand
• Low-pressure electric part: Schneider brand
• Encoder: Omron brand
• Screen type: Touch screen, also have buttons on the panel
• Cut command: Yes
• Profile length set-up: Yes
• Batch quantity program: Yes

5. Runout table

• 2 sets simple runout table for free, length 3m
• pneumatic push runout table charged, length customized according to client’s request

If you need to buy good quality machines, contact us freely!